EcoFlow extra battery - voor RIVER 600
With this extra battery you can easily increase the capacity of the EcoFlow River 600 from 288Wh to 576Wh.
Do you want to increase the energy capacity of the EcoFlow River? With this extra battery you can easily double the capacity of the EcoFlow from 288Wh to 576Wh. The extra battery is easy to attach to the main model.
Please note, this (extra) battery cannot be used on its own! For this you need to install the module on RIVER to use it.
How do I install the Ecoflow Extra Battery?
1. Make sure the EcoFlow RIVER is turned off. Remove the screwdriver from the extra battery module kit and locate the four screws on the bottom cover.
Note: Please pay attention during the installation process to avoid static electricity.
2. Remove the 4 screws and the bottom cover. The additional battery module should be positioned as shown in the figure.
3. Align and connect the male and female battery connectors. Close the bottom cover. Take the four long screws from the kit and screw them onto the screw hole.
4. Stand the EcoFlow RIVER upright and turn it on. The ambient light of the additional battery turns on. If the indicator light of the additional battery module appears on the display of the EcoFlow RIVER, it has been activated successfully. If the ambient light or the auxiliary battery module indicator light is not active, repeat the installation steps and then check the connection.